MAG6804 4 Channel Network System Audio Terminal

Name: MAG6804 4 Channel Network System Audio Terminal
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Network audio terminal;
● Two network connection ports, can work between different networks;
● Maximum 48KHz sample rate, 16bit digital audio decode;
● 10M/100M10M/100Mautomatic network adaption;
● 24V/100MAoutput and shortcut output;
● Can play background music,emergency paging and alarm signal from the host;
● One EMC input, one EMC output;
● Built-in monitor speaker;

Contact now Leave message Download

Introduction
Specification
Connection

Network PA system is based on internet and built in modules and layers. It is an integrated and intelligent PA system. The system is digital transmission and realized by Lan. The transmission distance can reach more than 10 kilometers. The configuration of this system can take advantage of the existing LAN system, and is time &cost saving. The combination with the LAN makes it possible for interaction function, which the traditional PA system unable to realize. Unlike traditional PA system which is only able to transmit information in one direction and control in station, this network system make it possible for interaction function due to its combination with LAN system. The network PA system center is able to connect to multiple terminals, such as, play terminal, on-demand terminal, paging terminal, one-touch emergency alarm terminal. The system center has the function of player, zoning, pre-amplifier, timer, equalizer, and powerful audio matrix, etc. The network PA system can be applied to different occasions, such as, airport, port, university, school, large gathering site (e.g. Expo), stadium, industrial park, park, railway, highway, etc.

Test item			Indicator parameters
EMC parameters (EMC LINE IN port input)	CH1, CH2, CH3 and CH4 rated output		1V
	Input sensitivity	MAX:	250mV
		MIN:	4V
	Effective frequency range of gain limit (±3dB)		50Hz-20kHz
	Signal-noise ratio (low pass 30kHz)		≥70dB
	Total harmonic distortion (1kHz, 1/3 output voltage)		≤0.1%
	EMC LINK output		Equal to EMC LINE input (±10%)
	Input dynamic scope		≥26dB
Network decoding parameters (host machine MP3 input)	CH1, CH2, CH3 and CH4 rated output		1V
	Distortion degree (1kHz -10dB/MP3)		≤0.2%
	Effective frequency range of gain limit (±3dB):		50Hz-20kHz
	Signal-noise ratio (low pass 30kHz)		≥70dB
Alarm output (Host software control)	COM-24V output		24V (≤100mA)
	COM-SC output		Short circuit (＜1Ω)
Built-in monitoring power			1.2W
Network			Dual network interface 10M/100M self-adaptive
Power			AC 180V-242V/50Hz
Power consumption			12W

MAG6804 4 Channel Network System Audio Terminal

PREV: MAG6801 1 Channel Network System Audio Terminal

NEXT: MAG6406 Network Wall Mount Alarm Terminal

Relate Products

MAG6811 1-channel Audio Output TerminalDecember 15, 2022The 1-channel audio output terminal is a network full digital analog-to-digital conversion signal processor based on the TCP/IP transmission protocol. With dual network redundancy design, it can be co...view
MAG6416 16-Channel Fire Fighting Linkage Network TerminalNovember 30, 2016view
MAG6104C 1-Channel Network Audio Output TerminalJune 8, 2023The 1-channel audio output terminal is a network and fully digital analog-to-digital signal processor based on TCP/IP transmission protocol. The machine can output the remote audio data stream as audi...view

Leave a Message Email Us

we will contact you within 24 hours.