MAG6801 network audio terminal is a TCP/IP based full digital analog-digital conversion signal processor, with dual network interface redundancy design and may be deployed anywhere with network access. This device allows output of audio signals from remote audio streaming media under intelligent control of the controller; the device provides one emergency audio input port for connection to emergency signals from fire control center and another emergency audio output port for connection to emergency amplifier; the device does not require any local operation and can work after properly configured via management software.
Model |
MAG6801 |
||
EMC (EMC LINE IN) |
CH1 Constant output |
1V |
|
Input Sensitivity |
MAX: |
4V |
|
MIN: |
250mV |
||
Effective frequency range of gain limit (±3dB) |
20Hz-20kHz |
||
SNR (low pass30kHz) |
≥70dB |
||
THD (1kHz,1/3 output voltage) |
≤0.1% |
||
EMC LINK Output |
Equal toEMC LINE Input (±10%) |
||
Input Dynamic range |
≥26dB |
||
Network decoding (Host MP3 Input) |
CH1 Constant output |
1V |
|
Distortion (1kHz -10dB/MP3) |
≤0.2% |
||
Effective frequency range of gain limit (±3dB) |
50Hz—20kHz |
||
SNR (low pass30kHz) |
≥70dB |
||
EMC output |
COM-24VOutput |
24V(The total current is 1A) |
|
COM-SCOutput |
Short Circuit (<1Ω) |
||
Built-in Monitor Power |
1W |
||
Network |
Dual network ports, 10M/100M |
||
Power Supply |
AC220V/50Hz |
||
Standby Power Consumption |
5W |
||
Rated power consumption |
7.5W |
||
Packing Size (L×W×H mm) |
555×360×120 |
||
Machine Size (L×W×H mm) |
483×273×44 |
||
Net Weight |
3.3kg |
||
Gross Weight |
4kg |
we will contact you within 24 hours.