POE6463 POE Powered Network Wall Mount Speaker

Name: POE6463 POE Powered Network Wall Mount Speaker
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● It can be coupled at any place with access to the network.
● It has an MP3 decoding play function.
● It supports a maximum 48kHz sampling rate and 16-bit digital audio bit stream decoding.
● The rated output power of the main speaker is 15W when the output of the built-in amplifier is not connected to a sub-speaker, and the rated output power of the main and sub-speakers is 2*8W when connected to a sub-speaker.
● It can play the background music, emergency paging, alarm signal and so on from the system host machine.
● It has a way auxiliary audio input interface, a way auxiliary audio output port, a way EMC emergency output port and 1-way short circuit output, as well as 1-way MIC input.
● The local output volume and local playing state are controllable.
● Signal state LED indication, working state and information change digital display.
● It can be controlled by the infrared remote controller.
● Provide a complete interface that complies with the IEEE 802.3af/at standard of the Power over Ethernet (PoE) system.

Contact now Leave message Download

Introduction
Specification
Connection

PoE6463 networked speaker is a networked all-digital analog-digital signal conversion processor with high fidelity speaker based on TCP/IP transmission protocol, so as to realize modern network display terminal with the overall design of the processor and sound box. The remote audio data stream can output the audio signal through the machine, and directly send sound from the sound box with intelligent control of the host machine; MP3 program can be played when the network audio stream signal is not played; a-way auxiliary audio input interface is used to connect other audio source device (such as DVD), and a way auxiliary audio output interface is used to connect other power amplifiers, so as to expand the power.

Model		PoE6463
AUX IN	Input sensitivity	320mV
	Frequency response	40Hz-20kHz(±3dB)
	Distortion	≤1%
	Signal-to-noise ratio	≥75 dB
AUX OUT	Rated Output	1V
	Frequency response	25Hz-20kHz(±3dB)
	Distortion	≤1%
	Signal-to-noise ratio	≥75dB
USB/SD /NET/MP3	Frequency response	40Hz-20kHz(±3dB)
	Distortion	≤1%
	Signal-to-noise ratio	≥70dB
100V Audio Output	Rated input power	30W
Maximum Output Power of Built-in Amplifier	Connected to a sub speaker	8W*2/8Ω
Maximum Output Power of Built-in Amplifier	Not connected to a sub speaker	15W/8Ω
Maximum Harmonic Distortion of Built-in Amplifier		1%
Display Screen		Digital screen
Package Size (L×W×H mm)		590×275×390
Machine Size (L×W×H mm)		310×215×200
Gross Weight		11.5kg
Net Weight		4.55kg

POE6463 POE Powered Network Wall Mount Speaker

PREV: POE6463B POE Wall Mount Speaker

NEXT: POE Speaker

Relate Products

DSP170E IP Network POE Active Outdoor Horn SpeakerApril 14, 2020view
POE6311 POE IP Network Ceiling SpeakerNovember 14, 2018POE6311 IP network ceiling speaker is a network of all-digital analog-digital conversion signal processor based on the TCP / IP transmission protocol. With dual network port design, it can be attached...view
DSP602E IP Network Ceiling SpeakerMarch 10, 2020The DSP602E is a network active ceiling speaker that supports the network PA/intercom system, support for international standard SIP protocols, can accept PA and calls from the LAN/WAN, quickly place ...view

«
1
2
3
4
... 6
»

Leave a Message Email Us

we will contact you within 24 hours.