MAG6701 100V Network Terminal with 24V emergency power supply

Name: MAG6701 100V Network Terminal with 24V emergency power supply
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Dual-network redundancy design, able to work cross-network segment
● Able to be installed in any place where there is a network.
● Built-in MP3 player, with USB interface and SD interface to play local program
● Independent execution of timing function without host
● Support maximum 48kHz sampling rate, 16-bit digital audio decoding
● Built-in 1×60W high fidelity digital amplifier, low power consumption
● Able to play background music, emergency paging and alarm signal from the system host
● One auxiliary audio input interface, one auxiliary audio output interface, two MIC input interfaces, one EMC emergency output interface and one short circuit output
● Controllable volume and playing status of local output
● LED indicator to show signal status, working status and information change
● Support infrared remote control
● Could set the priority of audio source through Network

Contact now Leave message Download

Introduction
Specification
Connection

MAG6701 100V Network terminal is a network full digital analog-digital signal conversion processor based on TCP/IP communication protocol. Dual-network redundancy design makes it possible to any place where there is network. Remote digital data flow could export audio signal through this device, which is controlled by host. There is built-in MP3 player, USB interface and SD card interface. You could also play local MP3 program when there is no Network audio signal. It could execute timing function without host. There is one audio input interface to connect with other audio equipment (such as DVD). There is one auxiliary audio output interface to connect with other amplifiers to extend power. There is also a MIC interface to realize local paging.

Model		MAG6701
AUX IN	Input sensitivity	300 mV±30mV
	Frequency response	80Hz-16kHz(±3dB)
	Distortion	≦1%
	Noise	14mV
	Signal-to-noise ratio	≥77dB
AUX OUT	Input sensitivity	1000mV±100mV
	Frequency response	35Hz-20KHz(±3dB)
	Distortion	0.1%
	Noise	0.12 mV
	Signal-to-noise ratio	≥77 dB
Maximum output power of the built-in power amplifier	Single channel mode	60W/160Ω
Maximum harmonic distortion of the built-in power amplifier		≦1%
MIC input	Input sensitivity	3.5 mV±1mV
	Frequency response	80Hz-16kHz(±3dB)
	Distortion	≦0.5%
	Noise	14mV
	Signal-to-noise ratio	≥77 dB
USB/SD /NET Play MP3	Input sensitivity	100V±5V
	Frequency response	85Hz-16kHz(±3dB)
	Distortion	≦0.4%
	Noise	14 mV
	Signal-to-noise ratio	≥77dB
Capacity of external U disk supported		32GB
100V backup conversion time		220ms (±50ms)
Voltage range of power supply voltage		AC220V/50Hz
Overcurrent, overheat, over-voltage and under-voltage protection		Support
Package dimension (L×W×H mm)		330×270×125
Machine dimension (L×W×H mm)		222×195×56
Net weight		2.35kg
Gross weight		3.2kg

MAG6701 100V Network Terminal with 24V emergency power supply

PREV: MAG6701 IP Network Terminal with Built-in Amplifier

NEXT: No information

Relate Products

MAG6701 IP Network Terminal with Built-in AmplifierAugust 20, 2018MAG6701 100V Network terminal is a network full digital analog-digital signal conversion processor based on TCP/IP communication protocol. Dual-network redundancy design makes it possible to any place...view
MAG6310 2x15W IP Network Terminal with AmplifierMarch 14, 2017MAG6310 Network display system terminal is a network full digital signal processor based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Unde...view
MAG6402 Network PA System On-Demand TerminalNovember 30, 2016The network PA system on-demand terminal MAG6402 is a touch panel with luxurious design and TFT true color screen display. It is equipped with the basic operation function of the host, including sound...view

Leave a Message Email Us

we will contact you within 24 hours.