POE6310 IP Network Terminal with Built-in Amplifier

Name: POE6310 IP Network Terminal with Built-in Amplifier
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Can be mounted anywhere with network;
● Built in with an MP3 decoding player
● Support maximum sampling rate of 16bit 48kHz digital audio stream decoding;
● Built-in 2 × 15W high-fidelity digital amplifier, low-power settings;
● Can play background music, emergency paging and alarm signals from system host;
● With 1 AUX input & output, 1 mic inputs and 1 EMC output, 1 short circuit output;
● Local output volume and local play status can be controlled;
● Operating status and information changing digital display;
● Can be remote controlled by infrared remote;
● With power supply interface that complies with POE IEEE○R, 802.3af/at standard

Contact now Leave message Download

Introduction
Specification
Connection

POE6310 network display terminal is a networked all-digital analog-digital conversion signal processor based on TCP/IP transmission protocol, which adopts the dual network design, and can be coupled at any place with access to network. The remote audio data stream can output the audio signal through the machine with intelligent control of the host; built-in MP3 player, and is provided with USB and SD. MP3 program can be played when the network audio stream signal is not played; it can be separated from the host machine to implement the timing point independently; 1-channel AUX audio input interface is used to connect other audio source device (such as DVD), and 1-channel AUX audio output interface is used to connect other power amplifiers, so as to expand the power; there is a way microphone interface, so as to realize local paging and so on.

Indicator item		Indicator
Model		POE6310
AUX IN	Input sensitivity	800 mV
	Frequency response	26Hz-20kHz
	Distortion	≤0.5%
	SNR	≥75 dB
AUX OUT	Rated output	1000mV
	Frequency response	25Hz-20kHz (±3dB)
	Distortion	≤0.3%
	SNR	≥75 dB
MIC IN	Input Sensitivity	5mV
	Frequency response	30Hz-16kHz (±3dB)
	Distortion	≤0.5%
	SNR	≥65dB
USB/SD/NET/MP3	Frequency response	25Hz-18kHz (±3dB)
	Distortion	≤0.5%
	SNR	≥70dB
Capacity of SD card supported		32G
Capacity of U disk supported		32G
Power		15W
Power supply		48V AT mode POE interface
Display screen		Digital Screen
Gross Weight		2.0kg
Net Weight		0.6kg
Package Size (L×W×H mm)		265×205×95mm
Dimension (L×W×H mm)		132×140×50mm

POE6310 IP Network Terminal with Built-in Amplifier

PREV: POE6368 POE Waterproof IP Network Column Speaker

NEXT: POE255II POE Network Weather Resistant Column Speaker

Relate Products

POE6401 IP Network Terminal with Built-in Amplifier (Customized)November 30, 2016POE6401 Network PA system terminal is a POE powered network full digital signal processor based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent control of the system center, thisview
PoE6364V 40W Network Indoor SpeakerDecember 13, 2022PoE6364V Network Indoor Speaker is a modern network playback terminal based on TCP/IP transmission protocol, which has a fully digital analog-to-digital conversion signal processor combined with high-...view
DSP6606E POE Wall Mount SpeakerApril 12, 2021DSP6606E is a network speaker with the network terminal processor and the high-fidelity speaker. It based on the TCP/IP protocol, support LAN and WAN, as well as cross-segmnet. Support SIP2.0 (RFC3261...view

«
1
2
3
4
5
... 6
»

Leave a Message Email Us

we will contact you within 24 hours.